Debugging method of fully automatic cutting machine
With the continuous development of industrialization, fully automatic cutting machines have become essential equipment in enterprises, and people's lives cannot do without various types of textiles. Most of these fabrics need to be cut for processing, so the market demand for fully automatic cutting machines is also increasing. Of course, for the manufacturers and customers of these equipment, the debugging work of the fully automatic cutting machine is particularly important, which is the foundation for the smooth and normal operation of the equipment.
1、 Overall equipment inspection
Before debugging, it is necessary to conduct a multi-dimensional inspection of all accessories and connecting lines of the fully automatic cutting machine to ensure that all components are complete and connected normally, without any wear, rust, fracture, etc. In addition, it is also necessary to check whether the security cards, safety switches, contacts and other safety accessories of the machine are in an intact state, and whether they operate normally, such as on/off, speed, and accurate action.
2、 Operation debugging
1. Debugging of heating and control systems:
The heating system and control system of the fully automatic cutting machine are important guarantees for the normal operation of the machine. When debugging the equipment, it is necessary to perform simple operations on the machine. In terms of the heating system, the temperature control sensors of the air inlet, controller, temperature sensor, and other equipment should be checked one by one. In terms of control system, it is necessary to debug the starting, stopping, speed regulation, acceleration, and deceleration of the machine to ensure the smooth and stable operation of the equipment.
2. Electrical system debugging:
The electrical system is an important component of the fully automatic cutting machine. During equipment debugging, it is necessary to carefully check the wiring of various circuits to ensure that the power circuit wiring of each device is tight and free from looseness. Especially, due to the extensive use of electrical equipment, maintenance and monitoring should be inspected more carefully.
3. Mechanical system debugging:
The mechanical structure of a fully automatic cutting machine is the foundation for ensuring the normal operation of the equipment, so there are many issues that need to be considered in the debugging of the mechanical system. Before operating the equipment, it is necessary to adjust the equipment's correction slide, blade angle, blade pressure, meshing accuracy, etc. according to the manual to avoid quality issues such as jamming, deviation, and unclear cutting during machine operation.